Glass Tile / August 27, 2018 / FifineAsselin.
I am amazed at the number of tile contractors who claim to be experts in glass tile installations yet cannot even tell the right direction the tile should be installed! Some contractors will not admit they are unskilled and untrained at this specialty and install the tile upside down because they have never worked with "paper faced material". They later call to complain that tiles are falling out and have glass imperfections. So the first rule is to ensure the person who is installing your glass tile has attended a glass tile setting seminar such as those offered by Bisazza or Oceanside Glasstile or otherwise demonstrated glass tile installation competency.
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.
There normally is not a concern with seeing the mesh backing through this tile. The same precautions still need to be taken into consideration for installation as well. The last thing to take into consideration is the grout. To play it safe the best grout to use is either an un sanded grout or specialty grout. The reason you will wand an un sanded grout is there is no sand particles in the unsanded grout. Sand particles found in sanded grout can possibly scratch the surface of the glass. The specialty grouts do not have any sand particles in them including the epoxy grout and urethane grouts. Home owners who want to make their kitchen pools or bathrooms look good often consider using glass tile. However these tiles can be quite pricey and can end up costing a person more when it comes to construction and renovation projects.
Often glass tiles are translucent in appearance and any imperfection in either the setting application or the thinset is magnified. Whichever tile is being installed the substrate must be perfectly smooth using the manufacturers suggested setting materials and following their instructions exactly as written. Any "waves or grooves" in setting material are noticeable which is another reason a consumer needs to hire a contractor trained in glass tile installation. Another major quality difference between glass tiles is in the quality of the glass used during production. Oceanside Glass is famous for using recycled bottles in its production and provides consumers with a guide of how much post-consumer recycled material are used in their production and can assist with LEED accreditation. Additionally their state-of-the-art equipment for precision processing in batching changing furnaces and cooling molten glass is revolutionary.