Metal Tile / September 13, 2018 / FifineAsselin
This means it is environment friendly and is good to have either in your home or in your office. Unlike wood or other traditional materials used for roofing it is not prone to insects mold or rot so you do not have to apply any harmful chemicals that could damage the environment. Having it for your home also saves energy. This means you can reduce the cooling costs by almost 40% together with the help of reflective paints that have energy saving properties. But of course this still depends where you live. The paint used in it reflects instead of absorbing the suns rays so less heat enters the structure. It does not require a lot of maintenance.
You can either select your own tile varieties and arrange them in an interesting pattern that catches the eye or purchase a mural pattern already arranged for you. This can be a feature of the room that pulls all of the other decor together. When done properly it can really set the mood in the room and give the allure of luxury and sophistication. The third use for this tile is as filler. If you have an idea for your wall using other types of tile or even just small areas that may be difficult to paint or wallpaper you can add in select metal pieces to fill small spaces where needed. In many cases this can be done so that the metal looks as if it were originally built into the design when in reality it was added at the last minute to hide a mistake or unforeseen problem in design.
The tiles must be tight and correctly aligned. The bottom and top course is then marked using a bevel. Two people may now chalk a line along the length of the valley. This gives a much straighter line than individual measurements. Laying the tiles Contrary to other roofing practices pressed steel tiles are best laid from the ridge down. Lay the under lap into the prevailing wind. This will ensure the maximum wind resistance and stop the roof lifting. The first full top course is laid out and fixed at the head of the tile allowing the subsequent row to be slid underneath the bottom. It is important to even out the tiles to make the best use of the cut ends.