Glass Tile / January 24, 2019 / Genevieve Brunelle
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.
Their craftsmen work the glass by hand to transform each tile into a piece as unique as a snowflake. Bisazza glass tile uses the highest quality ingredients and constantly works to improve the production process to result in stronger materials with more vibrant colors. Shortcuts in production and compromises with materials result in a finished product lacking perfectly squared edges color quality and strength. To the untrained eye the product may look similar in display but it is in fact extremely inferior. Quality producers of glass tile may also apply a bevel to each of their tiles to allow for more level and consistent surfaces during installation.
The reason so much more grout is removed than when grouting conventional tile is because light refracts better through the glass tile when the sides of the tiles are exposed to the light. Work 3x3 spaces for about ½ hour or until the grout begins to dry then sponge off the grout. Bring several buckets of clean water and a sponge to the work area before you begin. Soak up some water into the sponge and gently wipe away the excess grout that is adhered to the tile. Smooth the grout lines with the sponge using one continuous swipe. Flip the sponge over and swipe more grout from the tiles until it becomes full of grout. Rinse the sponge in a clean bucket of water and repeat.