Glass Tile / January 7, 2019 / Fealty Allaire
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.
Glass tiles are essentially pieces of glass formed into consistent shapes. Glass mosaic tiles are suitable for both internal and external applications as they are impervious to frost sunlight and water. This quality makes it best suited for wet or constantly submerged areas. They are easy to clean maintain and they never discolor. Glass tiles have a varied application in black slashes of drawing-room dining kitchen bath-room etc... They are also used to highlight certain features. The spot lighting has further increased their use. Although glass tiles are complex to install the benefits and beauty makes us over see. Production methods determine look and feel of a glass tile. There are four major types of glass tile based on their manufacturing method. They are smalti fused sintered and cast.
Although the definition of clear/translucent glass is "allowing light to pass through partially or diffusely" it doesnt mean that all clear glass tiles are transparent in a way that you can see for example an object or your hand behind it. Clear glass is the material used to make these tiles but they can have color or not. There are basically three types of clear glass tiles: back colored stained and plain or non-colored. Back colored clear glass mosaic tiles are by far the most popular in the market. The tiles are made of clear/translucent glass usually from 4mm to 8mm thick and they receive a coating/painting on the back during manufacturing which is what gives the color to the tile.