Glass Tile / January 10, 2019 / Genevieve Brunelle
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.
The reason for doing this is when installing the glass tiles you do not want to see the trowel marks through the glass tiles. Another key to think about when installing the translucent tile is to make sure the surface behind the tile is white. If you have a painted kitchen and the walls are currently a dark or strong color that color could appear through the glass tile. If installing the translucent tile make sure the surface is painted white first and make sure the use of white thin set as well. The second type of glass is where the glass itself is a crystal type glass with the color backed on the back. Most 4mm or 8mm crystal type glass is clear and then the color of the tile is applied on the back of the tile giving it the color.
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.