Glass Tile / September 8, 2018 / FifineAsselin.
There normally is not a concern with seeing the mesh backing through this tile. The same precautions still need to be taken into consideration for installation as well. The last thing to take into consideration is the grout. To play it safe the best grout to use is either an un sanded grout or specialty grout. The reason you will wand an un sanded grout is there is no sand particles in the unsanded grout. Sand particles found in sanded grout can possibly scratch the surface of the glass. The specialty grouts do not have any sand particles in them including the epoxy grout and urethane grouts. Home owners who want to make their kitchen pools or bathrooms look good often consider using glass tile. However these tiles can be quite pricey and can end up costing a person more when it comes to construction and renovation projects.
A tile backsplash is a technique in interior designing that could improve the décor of your home especially in the kitchen and bathroom area. It refers to the installation of tiles to protect your walls primarily from water splashes. However tile backsplashes are not limited to the kitchen or bathroom area. Although the main use of this technique is for protecting the walls of water splashes you can use it anywhere in your home. You may use it to refurbish your fireplace or give a new glimmering effect to your walls. There are different kinds of tile backsplashes and one of them is the glass tile backsplashes. How can this type of tile backsplash improve the décor of your home? With glass tiles you create an illusion of wider kitchen space or any space in your home. Glass tiles reflect light from the surrounding environment which make your space look brighter and wider.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.