Glass Tile / January 6, 2019 / Karlotta Boule
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.
Instead as art glass grows in popularity and the internet is increasingly adopted as a low-cost distribution and promotion mechanism we are seeing a trend towards glass art collectives and glass art dealers on the web. These organizations showcase the work of several artists; and provide services that range from simple sales channels to design support for integrated glass design for the home. An example of such a service is the Glass Artists Gallery . They have been helping designers and homeowners all across North America with art glass tiles lighting sinks and other functional glass art for years. They are not really a "brick and mortar gallery" but rather a resource for the trade and discerning homeowners for functional and architectural glass.
Installing glass tile is a great way to enhance your kitchen bathroom or pool remodeling project. With such a huge variety of colors shapes and styles this type of tile makes the perfect choice for an elegant solution to any designing theme. Add in the fact that these tiles are one of the most affordable tile products on the market today and its hard not to see why its such a popular element in home design. Before beginning any glass tile grouting project the affixed tiles must have been allowed to cure for 36-48 hours. Any debris should be removed using a brush or shop vacuum. Use a wet sponge to remove any exposed thin-set that may have cured to the tiles.