Glass Tile / January 11, 2019 / Odette Pinneau
The reason so much more grout is removed than when grouting conventional tile is because light refracts better through the glass tile when the sides of the tiles are exposed to the light. Work 3x3 spaces for about ½ hour or until the grout begins to dry then sponge off the grout. Bring several buckets of clean water and a sponge to the work area before you begin. Soak up some water into the sponge and gently wipe away the excess grout that is adhered to the tile. Smooth the grout lines with the sponge using one continuous swipe. Flip the sponge over and swipe more grout from the tiles until it becomes full of grout. Rinse the sponge in a clean bucket of water and repeat.
In situations where glass tile is exposed to extreme temperature differences an elasticizing polymer is added to the mix allowing the grout to stretch and flex preventing breaks from occurring in the delicate glass tiles. Using a grout float scoop a manageable amount of grout onto the float. Start at the farthest or highest spot away from you and spread the grout in between the tiles diagonally across the pattern. Dont worry about getting grout all over the tiles. The grout must be firmly pressed into the grout lines with the grout float covering all spaces and voids. Once a 3x3 section of grout has been applied to the tile use the small rubber edge of the grout float to remove about a third of the grout from between the tiles.
Glass tiles are essentially pieces of glass formed into consistent shapes. Glass mosaic tiles are suitable for both internal and external applications as they are impervious to frost sunlight and water. This quality makes it best suited for wet or constantly submerged areas. They are easy to clean maintain and they never discolor. Glass tiles have a varied application in black slashes of drawing-room dining kitchen bath-room etc... They are also used to highlight certain features. The spot lighting has further increased their use. Although glass tiles are complex to install the benefits and beauty makes us over see. Production methods determine look and feel of a glass tile. There are four major types of glass tile based on their manufacturing method. They are smalti fused sintered and cast.