Glass Tile / January 11, 2019 / Odette Pinneau
Instead as art glass grows in popularity and the internet is increasingly adopted as a low-cost distribution and promotion mechanism we are seeing a trend towards glass art collectives and glass art dealers on the web. These organizations showcase the work of several artists; and provide services that range from simple sales channels to design support for integrated glass design for the home. An example of such a service is the Glass Artists Gallery . They have been helping designers and homeowners all across North America with art glass tiles lighting sinks and other functional glass art for years. They are not really a "brick and mortar gallery" but rather a resource for the trade and discerning homeowners for functional and architectural glass.
What that means is glass expands and contracts at a greater rate than other materials someone might use in their pool e.g. ceramic or stone. Since the tile is adhered to the bottom of the pool while its expanding and contracting it can easily crack and break if the cement its laid into doesnt stretch with it. Therefore the question often heard from customers is "How do I install glass tile in my pool without having to repair the broken tiles year after year?" The answer has not always been an easy one. However with advances in technology and contractors growing experience installing glass tile we are now able to provide customers with the right recommendations so that their pool installation experiences minimal problems.
In situations where glass tile is exposed to extreme temperature differences an elasticizing polymer is added to the mix allowing the grout to stretch and flex preventing breaks from occurring in the delicate glass tiles. Using a grout float scoop a manageable amount of grout onto the float. Start at the farthest or highest spot away from you and spread the grout in between the tiles diagonally across the pattern. Dont worry about getting grout all over the tiles. The grout must be firmly pressed into the grout lines with the grout float covering all spaces and voids. Once a 3x3 section of grout has been applied to the tile use the small rubber edge of the grout float to remove about a third of the grout from between the tiles.