Glass Tile / January 8, 2019 / Belda Jodion.
You may be wondering what is a fused glass tile blocks where can it be used and what designs are available. Read on to learn more. What are fused glass tile blocks? How are they made? This product combines the beauty of decorative glass art with the strength structure and security of blocks. These tiles are individually hand crafted by glass artisans. The tiles are made by fusing layers of colored and clear glass in a kiln at a temperature greater than 1400 degrees. Since the tiles use real colored glass they wont fade or delaminate like inexpensive units. The tiles are available in 73 transparent 46 opaque and custom dichroic and iridescent colors. Once the tiles are made they are fused to the glass blocks in any type of custom design. For centuries glass has been a featured material in mosaic media to decorate and articulate a building.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.
There normally is not a concern with seeing the mesh backing through this tile. The same precautions still need to be taken into consideration for installation as well. The last thing to take into consideration is the grout. To play it safe the best grout to use is either an un sanded grout or specialty grout. The reason you will wand an un sanded grout is there is no sand particles in the unsanded grout. Sand particles found in sanded grout can possibly scratch the surface of the glass. The specialty grouts do not have any sand particles in them including the epoxy grout and urethane grouts. Home owners who want to make their kitchen pools or bathrooms look good often consider using glass tile. However these tiles can be quite pricey and can end up costing a person more when it comes to construction and renovation projects.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.