Natural Stone / September 6, 2018 / FifineAsselin
This should not be counted as a negative side to natural stone tiles as there are ways to maintain them and we must bear in mind that any natural products requires maintenance. Once natural stone tiles are laid there are three steps that must be done to maintain the tiles which includes filling washing and sealing. This process must be repeated every two to five years depending on the quality of natural stone. The first step after laying the tiles is to fill them. All the holes must be filled with filler of the same color. Any gap between the tiles must be grouted. You need to allow one to two days for the filler and grout to be dried.
Im using a few of my vacation days to make a final push in the kitchen before moving on to the master bath. From what Ive done so far I think the kitchen looks terrific! Sure its probably not as perfect (and certainly the work isnt getting done as fast) as it would be if I hired a professional crew but Im enjoying putting in the natural stone tiles on my own. I think Ill derive greater satisfaction out of the finished product knowing it came as a direct result of my own toil. Now lets just hope I actually get all of this work done in a reasonable amount of time! All natural stone tiles are subject to variations in colour grain structure tonality and veining. Expert sales staff can give guidance on the correct procedure for handling installing and preserving each type of tile in the ranges available but it is strongly recommend all natural stone is installed by a professional stone mason or tiler. One of the advantages of having natural stone is its long lasting beauty. Sand dirt or grit can do damage to any surface so it is highly recommended that interior floors are frequently swept and mopped with a dry dust mop. Placing mats or rugs at the entrance of a hallway or room will also help minimise the problem. Also avoid using cleaning utensils which could have sharp edges as it will scratch and make the surface lose its shine. When cleaning natural stone always use a mild non-abrasive cleaning detergent with warm water. A clean mop for floors and a soft cloth for other surface areas should be used. The cleaning product you use should not have vinegar lemon or acid in its contents as these will do harm to the surface of the natural stone. In wet areas e.g. showers soap scum can be reduced by applying a non-acidic soap scum remover and using a squeegee to rub it in and wipe down with clean water.
On the other hand if there is a crack it might be of cheap quality. Water absorption: A real stone irrespective of whether it is exterior or interior natural stone tiles will not take in water even to a slight extent. This is why they are used these days in wet surfaces like bathrooms swimming pools Jacuzzis and even other areas where wetness is highly possible. When an individual is looking to purchase other types of tiles for his bathroom the water absorption capacity should be checked. Resistance to weather: Some types of floor tiles are chemically and synthetically designed. But exterior natural stone tiles have the innate ability to withstand even tough weather conditions. When a homeowner opts for the one with inferior quality rain sleet snow and wind can cause serious damage to his property.