Natural Stone / September 10, 2018 / FifineAsselin
Here are some of the main benefits of using these tiles. Natural stone tiles are an ideal choice for any bathroom or kitchen and you can even use them in other areas of the home. They are very versatile and many people are convinced that if you are going to lay tiles in your home then you should make sure that they are made from stone such as granite or travertine. But what are the exact benefits of choosing stone over other materials? Here are some things to consider. Classy Appearance Wherever you lay them these tiles look great. The natural look can really help to create a soothing effect in the room and if you want something which mimics nature then you cannot really do much better than stone.
You should do three sponging cycles in order to maintain the cleanliness and stunning of the tile. The purpose of the first sponging is to clean the excess grout over the tile second is to smoothed the joints and third is to clean any residue left on the tile. However you have to allow minutes of time between sponging cycles because this allow the grout to set properly. Also be reminded that use the clean side of the sponge when wiping and cleaning the tile after grouting. And lastly wipe down the tile the next day to help seal the grout and to clean the tile as well. Always make sure that you use the correct sealant labeled for natural stone tile in order to maintain the appearance of the natural stone tile. Many people complain about natural stone floor tiles absorbing dirt or start developing holes after few years.
Using the edge of a trowel generously fill in the gaps between your tiles (created by using spacers) and smooth it over the surface at a 45 degree angle to the floor. A grout profiling tool can help after youve applied the grout to smooth the fill off and remove any unwanted excess. Caring for your natural stone tiles it an important to remember and before you finish your tiling job you need to seal the tiles to prevent the stone from becoming stained. This seal needs to be applied after tiles have been cleaned and any residual dust adhesive or grout has been removed with a residual remover. After applying and removing the residual remover a seal can then be added to help prevent materials and liquids from entering the pores of the stone and leaving potential marks. This seal needs to be regularly maintained in order to keep the tiles in good condition and can even be added to through the use of enhancing products to bring out the natural grain and contrasts of the stone.