Glass Tile / January 10, 2019 / Karlotta Boule
In this method colors are added to the top or bottom of the glass. Fused glass tiles are characterized with a translucent area and a layer of opaque color visible through the tile. These tiles are further treated with an etching or other coating for aesthetics or abrasion. Sintered tile is a variety made by pressing glass powder into dies and then heated until the particles fuse. The color is either added into the powder or added topically after cooling. Unlike smalti tiles sintered tiles tend to have a uniform look. This milky and scratch-resistant finish makes it versatile. Cast tile is made by inserting chunks of glass into a mold which gives it a layered look.
Glass tiles are essentially pieces of glass formed into consistent shapes. Glass mosaic tiles are suitable for both internal and external applications as they are impervious to frost sunlight and water. This quality makes it best suited for wet or constantly submerged areas. They are easy to clean maintain and they never discolor. Glass tiles have a varied application in black slashes of drawing-room dining kitchen bath-room etc... They are also used to highlight certain features. The spot lighting has further increased their use. Although glass tiles are complex to install the benefits and beauty makes us over see. Production methods determine look and feel of a glass tile. There are four major types of glass tile based on their manufacturing method. They are smalti fused sintered and cast.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.