Glass Tile / January 24, 2019 / Annette Laforest
I am amazed at the number of tile contractors who claim to be experts in glass tile installations yet cannot even tell the right direction the tile should be installed! Some contractors will not admit they are unskilled and untrained at this specialty and install the tile upside down because they have never worked with "paper faced material". They later call to complain that tiles are falling out and have glass imperfections. So the first rule is to ensure the person who is installing your glass tile has attended a glass tile setting seminar such as those offered by Bisazza or Oceanside Glasstile or otherwise demonstrated glass tile installation competency.
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.
The reason for doing this is when installing the glass tiles you do not want to see the trowel marks through the glass tiles. Another key to think about when installing the translucent tile is to make sure the surface behind the tile is white. If you have a painted kitchen and the walls are currently a dark or strong color that color could appear through the glass tile. If installing the translucent tile make sure the surface is painted white first and make sure the use of white thin set as well. The second type of glass is where the glass itself is a crystal type glass with the color backed on the back. Most 4mm or 8mm crystal type glass is clear and then the color of the tile is applied on the back of the tile giving it the color.