Glass Tile / January 15, 2019 / Belda Jodion
Since they dont have any color in it and are totally transparent they match any color from granite counter tops to kitchen cabinets and easily blend into the environment. Stained and Plain Clear Glass Tiles require more attention when installing. Because you can see what is on the other side of the tile you may end up seeing the path made by the trowel when the installer was butting the wall. So it is recommended to use a white adhesive such as mastic and also butter the back of the tiles. Make sure to press the tiles firmly against the wall with a grout float and take a look if there is any air bubbles after each piece has been placed so you may correct the problem before the adhesive dries. Definitely this type of glass tiles takes more time to install but the result is absolutely worth. Glass tile is all the rage in interior decorating right now but the real star is recycled glass tile.
Usually they are available mesh mounted on a fiberglass sheet or as field tiles such as subway 3"x6" 4"x4" 6"x6" and even 12"x12". Stained clear glass tiles are made of clear/translucent glass that are stained during its manufacturing process and then cut into multiple pieces. In this case you can see all the way through it even if it has a dark stain color and that is the reason they are not mesh-backed otherwise you would see the mesh through the glass even after installed. Instead they are mounted on clear-faced or paper-faced sheet. Plain or non-colored clear glass tiles are made of clear/translucent glass and do not have color in it. Though the word "plain" is used to describe these types of tiles they are extremely elegant and easy to work with if you want to give a special "touch" to a kitchen backsplash bathroom and shower or swimming pool.
The most important step in putting glass tile in a swimming pool is choosing the right installation materials. To reiterate the high rate of expansion and contraction of glass caused by temperature changes is the leading cause of cracks and damage to installed tiles. In order to compensate for this special thin-set adhesives and additives have been developed that expand and contract with the glass. The leading manufacturer of glass-specific tile adhesive systems is MAPEI and their Adesilex P10 thin-set and Keraply additive can be combined into an installation system that is specifically designed for applications where the glass tiles are completely submerged.