Glass Tile / January 17, 2019 / Genevieve Brunelle
What that means is glass expands and contracts at a greater rate than other materials someone might use in their pool e.g. ceramic or stone. Since the tile is adhered to the bottom of the pool while its expanding and contracting it can easily crack and break if the cement its laid into doesnt stretch with it. Therefore the question often heard from customers is "How do I install glass tile in my pool without having to repair the broken tiles year after year?" The answer has not always been an easy one. However with advances in technology and contractors growing experience installing glass tile we are now able to provide customers with the right recommendations so that their pool installation experiences minimal problems.
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.
The reason for doing this is when installing the glass tiles you do not want to see the trowel marks through the glass tiles. Another key to think about when installing the translucent tile is to make sure the surface behind the tile is white. If you have a painted kitchen and the walls are currently a dark or strong color that color could appear through the glass tile. If installing the translucent tile make sure the surface is painted white first and make sure the use of white thin set as well. The second type of glass is where the glass itself is a crystal type glass with the color backed on the back. Most 4mm or 8mm crystal type glass is clear and then the color of the tile is applied on the back of the tile giving it the color.