Natural Stone / September 6, 2018 / FifineAsselin
On the other hand if there is a crack it might be of cheap quality. Water absorption: A real stone irrespective of whether it is exterior or interior natural stone tiles will not take in water even to a slight extent. This is why they are used these days in wet surfaces like bathrooms swimming pools Jacuzzis and even other areas where wetness is highly possible. When an individual is looking to purchase other types of tiles for his bathroom the water absorption capacity should be checked. Resistance to weather: Some types of floor tiles are chemically and synthetically designed. But exterior natural stone tiles have the innate ability to withstand even tough weather conditions. When a homeowner opts for the one with inferior quality rain sleet snow and wind can cause serious damage to his property.
Different stones that you could choose from include travertine granite marble and slate and this means that you have a wide range of colours and patterns to choose from. Also because tiles are cut directly from the stone they will all be completely unique. Long Lasting Natural stone tiles are very long lasting and they can withstand a huge amount of foot traffic so are suitable for even the busiest areas of your home. They can resist spills knocks and drops making them incredibly durable. Even better they will keep their appearance for years and years. Easy to Maintain Generally tiles made from natural materials are very easy to keep in good condition.
Whenever you have a plan of placing a grout in your natural stone tile you should allow 1-2 days from when you applied the adhesive before beginning to grout. Always make sure that you clean the grout joints thoroughly and have taped off the areas which are not included in grouting in order to avoid grout from spilling over the tile. Mix the grout according to manufacturers specifications. It should have a fine consistency in order to have a fine and lump-free finished product. After you have done pouring all the natural stone tile joints with grout clean the surface of the tile with damp cloth after 10 minutes but be sure not to wipe out the grout from any of the tile joints.