Glass Tile / January 14, 2019 / Morgana Faubert.
Glass tiles have a higher rate of heat expansion which means that these glass tile backsplashes can withstand heat more than porcelain or ceramic tiles do. If you have a fireplace that you use often during the coldest days of the year giving it an image overhaul by installing a decorative tile backsplash is worth the money. Impress your friends and relatives with the newest design that is available in your local tile retailer Show off your backyard pool. Owning a pool is awesome where you can dispel the heat during summer seasons. However with the plain white or blue (or the combination of both colors) ensemble of your pool sometimes you wish your pool look livelier than its current appearance. vWith this newest trend on glass tile backsplashes give your backyard pool a face-lift and astonish your visitors when you hold a pool party or simple gatherings with your friends.
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.
The reason so much more grout is removed than when grouting conventional tile is because light refracts better through the glass tile when the sides of the tiles are exposed to the light. Work 3x3 spaces for about ½ hour or until the grout begins to dry then sponge off the grout. Bring several buckets of clean water and a sponge to the work area before you begin. Soak up some water into the sponge and gently wipe away the excess grout that is adhered to the tile. Smooth the grout lines with the sponge using one continuous swipe. Flip the sponge over and swipe more grout from the tiles until it becomes full of grout. Rinse the sponge in a clean bucket of water and repeat.
In situations where glass tile is exposed to extreme temperature differences an elasticizing polymer is added to the mix allowing the grout to stretch and flex preventing breaks from occurring in the delicate glass tiles. Using a grout float scoop a manageable amount of grout onto the float. Start at the farthest or highest spot away from you and spread the grout in between the tiles diagonally across the pattern. Dont worry about getting grout all over the tiles. The grout must be firmly pressed into the grout lines with the grout float covering all spaces and voids. Once a 3x3 section of grout has been applied to the tile use the small rubber edge of the grout float to remove about a third of the grout from between the tiles.