Glass Tile / January 21, 2019 / Annette Laforest
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.
Since they dont have any color in it and are totally transparent they match any color from granite counter tops to kitchen cabinets and easily blend into the environment. Stained and Plain Clear Glass Tiles require more attention when installing. Because you can see what is on the other side of the tile you may end up seeing the path made by the trowel when the installer was butting the wall. So it is recommended to use a white adhesive such as mastic and also butter the back of the tiles. Make sure to press the tiles firmly against the wall with a grout float and take a look if there is any air bubbles after each piece has been placed so you may correct the problem before the adhesive dries. Definitely this type of glass tiles takes more time to install but the result is absolutely worth. Glass tile is all the rage in interior decorating right now but the real star is recycled glass tile.
The reason for doing this is when installing the glass tiles you do not want to see the trowel marks through the glass tiles. Another key to think about when installing the translucent tile is to make sure the surface behind the tile is white. If you have a painted kitchen and the walls are currently a dark or strong color that color could appear through the glass tile. If installing the translucent tile make sure the surface is painted white first and make sure the use of white thin set as well. The second type of glass is where the glass itself is a crystal type glass with the color backed on the back. Most 4mm or 8mm crystal type glass is clear and then the color of the tile is applied on the back of the tile giving it the color.