Glass Tile / January 8, 2019 / Karlotta Boule.
In situations where glass tile is exposed to extreme temperature differences an elasticizing polymer is added to the mix allowing the grout to stretch and flex preventing breaks from occurring in the delicate glass tiles. Using a grout float scoop a manageable amount of grout onto the float. Start at the farthest or highest spot away from you and spread the grout in between the tiles diagonally across the pattern. Dont worry about getting grout all over the tiles. The grout must be firmly pressed into the grout lines with the grout float covering all spaces and voids. Once a 3x3 section of grout has been applied to the tile use the small rubber edge of the grout float to remove about a third of the grout from between the tiles.
According to Wes Wayland of Bisazza USA "It gives a client the ability to clad curved surfaces both concave and convex and to form clean inside and outside corners with more ease and a finished look. This also gives them the ability to create mosaics on furniture walls ceilings pools even cladding of entire buildings with unique designs". Glass tile isnt JUST for the bathroom anymore. Bisazza wants consumers and designers to think outside the box and are offering prefabricated mosaic patterns and designs intended to cover large vertical surfaces as wallpaper would and that are perfectly suited for the bedroom - living room - board room - foyer - etc.
I am amazed at the number of tile contractors who claim to be experts in glass tile installations yet cannot even tell the right direction the tile should be installed! Some contractors will not admit they are unskilled and untrained at this specialty and install the tile upside down because they have never worked with "paper faced material". They later call to complain that tiles are falling out and have glass imperfections. So the first rule is to ensure the person who is installing your glass tile has attended a glass tile setting seminar such as those offered by Bisazza or Oceanside Glasstile or otherwise demonstrated glass tile installation competency.
Since they dont have any color in it and are totally transparent they match any color from granite counter tops to kitchen cabinets and easily blend into the environment. Stained and Plain Clear Glass Tiles require more attention when installing. Because you can see what is on the other side of the tile you may end up seeing the path made by the trowel when the installer was butting the wall. So it is recommended to use a white adhesive such as mastic and also butter the back of the tiles. Make sure to press the tiles firmly against the wall with a grout float and take a look if there is any air bubbles after each piece has been placed so you may correct the problem before the adhesive dries. Definitely this type of glass tiles takes more time to install but the result is absolutely worth. Glass tile is all the rage in interior decorating right now but the real star is recycled glass tile.