Glass Tile / January 19, 2019 / Odette Pinneau
Their craftsmen work the glass by hand to transform each tile into a piece as unique as a snowflake. Bisazza glass tile uses the highest quality ingredients and constantly works to improve the production process to result in stronger materials with more vibrant colors. Shortcuts in production and compromises with materials result in a finished product lacking perfectly squared edges color quality and strength. To the untrained eye the product may look similar in display but it is in fact extremely inferior. Quality producers of glass tile may also apply a bevel to each of their tiles to allow for more level and consistent surfaces during installation.
There normally is not a concern with seeing the mesh backing through this tile. The same precautions still need to be taken into consideration for installation as well. The last thing to take into consideration is the grout. To play it safe the best grout to use is either an un sanded grout or specialty grout. The reason you will wand an un sanded grout is there is no sand particles in the unsanded grout. Sand particles found in sanded grout can possibly scratch the surface of the glass. The specialty grouts do not have any sand particles in them including the epoxy grout and urethane grouts. Home owners who want to make their kitchen pools or bathrooms look good often consider using glass tile. However these tiles can be quite pricey and can end up costing a person more when it comes to construction and renovation projects.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.