Glass Tile / January 23, 2019 / Astrid Auclair
The reason for doing this is when installing the glass tiles you do not want to see the trowel marks through the glass tiles. Another key to think about when installing the translucent tile is to make sure the surface behind the tile is white. If you have a painted kitchen and the walls are currently a dark or strong color that color could appear through the glass tile. If installing the translucent tile make sure the surface is painted white first and make sure the use of white thin set as well. The second type of glass is where the glass itself is a crystal type glass with the color backed on the back. Most 4mm or 8mm crystal type glass is clear and then the color of the tile is applied on the back of the tile giving it the color.
A tile backsplash is a technique in interior designing that could improve the décor of your home especially in the kitchen and bathroom area. It refers to the installation of tiles to protect your walls primarily from water splashes. However tile backsplashes are not limited to the kitchen or bathroom area. Although the main use of this technique is for protecting the walls of water splashes you can use it anywhere in your home. You may use it to refurbish your fireplace or give a new glimmering effect to your walls. There are different kinds of tile backsplashes and one of them is the glass tile backsplashes. How can this type of tile backsplash improve the décor of your home? With glass tiles you create an illusion of wider kitchen space or any space in your home. Glass tiles reflect light from the surrounding environment which make your space look brighter and wider.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.