Natural Stone / September 3, 2018 / FifineAsselin.
The second step is washing. All the tiles must be washed with water and soap and they must be free of any dirt grout or tile adhesive. After washing you must allow the tiles to be dried for two to four weeks depending on the season. In winter it takes more time for the tiles to be dried so it takes more time and during the summer the tiles get dry quicker so one to two weeks would be fine. The last step is sealing. Sealing is like applying a layer of glue on top of the tiles to protect the surface from dirt and water absorption. Sealers are quite pricy however; it is worth it to spend some money to protect your beautiful natural stone.
There are different types of sealer such as invisible sealer color enhancer sealer deep sealer etc. Depending on your purpose you would choose the proper sealer. For example invisible sealer does not change the character or color of your tiles while still protecting it but color enhancer sealer will make your tiles darker and will bring the color out. Deep sealer is used for more porous natural stone such as limestone and sandstone. This process must be repeated every couple of years depending on the type and quality of you Stone. For example for travertine and limestone this should be done every two to three years and for granite and marble it could be done every four to five years.
Using the edge of a trowel generously fill in the gaps between your tiles (created by using spacers) and smooth it over the surface at a 45 degree angle to the floor. A grout profiling tool can help after youve applied the grout to smooth the fill off and remove any unwanted excess. Caring for your natural stone tiles it an important to remember and before you finish your tiling job you need to seal the tiles to prevent the stone from becoming stained. This seal needs to be applied after tiles have been cleaned and any residual dust adhesive or grout has been removed with a residual remover. After applying and removing the residual remover a seal can then be added to help prevent materials and liquids from entering the pores of the stone and leaving potential marks. This seal needs to be regularly maintained in order to keep the tiles in good condition and can even be added to through the use of enhancing products to bring out the natural grain and contrasts of the stone.
The natural stone tiles are being designed in such a way that they would cater to all your requirements with a single design. These are available in different versions to suit various landscapes. The landscape designs would be eye feasting if you opt for a design which fits your space. The landscape designs include marble tiles travertine tiles sandstone tiles limestone tiles etc. Choose one among the above that fits your landscape and give it an exquisite look and luxury. Choosing your tile out of these many variants is a herculean task. However if you have a professional expert service provider within the reach it would become much easier and hassle free.