Natural Stone / August 19, 2018 / FifineAsselin
Natural stone tiles may not be the easiest material to use and maintain for walls and flooring but they are certainly one of the most rewarding both in terms of quality and also return on investment since it is widely believed that a natural stone wall or floor will increase the value of your property. In addition to these benefits natural stone tiles also are extremely hard wearing and in most cases with some care and attention will last as long as the house does. As already mentioned there is perhaps more work involved both in fitting and maintaining natural stole tiles than there is in some alternatives such as wood flooring.
This seal needs to be applied after tiles have been laid and grouted and after any residual dust adhesive or grout need to be removed with a residual remover. After applying and removing the residual remover a seal can then be added to help prevent materials and liquids from entering the pores of the stone and leaving potential marks. This seal needs to be regularly maintained in order to keep the tiles in good condition and can even be added to through the use of enhancing products to bring out the natural grain and contrasts of the stone. Natural stone tiles are one of the best types of tile that you can lay in your home whether you use them in the kitchen bathroom or anywhere else.
Dont worry too much about cleaning the tiles before you lay them - this will need to be done after theyve been laid and grouted anyway. Try to work out of several packs of tiles when laying to help you achieve a truly random and harmonious aesthetic. When it comes to cutting natural stone tiles the best way to do this is with an electric tile wet cutter. In addition to stone tiles being quite thick and strong they are also a natural material and will therefore by nature have veins and faults in it making it unsuitable to be cut using a manual tile cutter which would be more likely to shatter the tile as opposed to snap it. Be aware that wet cutting can be messy and create significant amounts of dust and debris; therefore try to either perform the cutting outdoors or in a safe environment.