Natural Stone / August 26, 2018 / FifineAsselin.
The natural stone tiles are being designed in such a way that they would cater to all your requirements with a single design. These are available in different versions to suit various landscapes. The landscape designs would be eye feasting if you opt for a design which fits your space. The landscape designs include marble tiles travertine tiles sandstone tiles limestone tiles etc. Choose one among the above that fits your landscape and give it an exquisite look and luxury. Choosing your tile out of these many variants is a herculean task. However if you have a professional expert service provider within the reach it would become much easier and hassle free.
This should not be counted as a negative side to natural stone tiles as there are ways to maintain them and we must bear in mind that any natural products requires maintenance. Once natural stone tiles are laid there are three steps that must be done to maintain the tiles which includes filling washing and sealing. This process must be repeated every two to five years depending on the quality of natural stone. The first step after laying the tiles is to fill them. All the holes must be filled with filler of the same color. Any gap between the tiles must be grouted. You need to allow one to two days for the filler and grout to be dried.
Using the edge of a trowel generously fill in the gaps between your tiles (created by using spacers) and smooth it over the surface at a 45 degree angle to the floor. A grout profiling tool can help after youve applied the grout to smooth the fill off and remove any unwanted excess. Caring for your natural stone tiles it an important to remember and before you finish your tiling job you need to seal the tiles to prevent the stone from becoming stained. This seal needs to be applied after tiles have been cleaned and any residual dust adhesive or grout has been removed with a residual remover. After applying and removing the residual remover a seal can then be added to help prevent materials and liquids from entering the pores of the stone and leaving potential marks. This seal needs to be regularly maintained in order to keep the tiles in good condition and can even be added to through the use of enhancing products to bring out the natural grain and contrasts of the stone.
Natural stone tiles may not be the easiest material to use and maintain for walls and flooring but they are certainly one of the most rewarding both in terms of quality and also return on investment since it is widely believed that a natural stone wall or floor will increase the value of your property. In addition to these benefits natural stone tiles also are extremely hard wearing and in most cases with some care and attention will last as long as the house does. As already mentioned there is perhaps more work involved both in fitting and maintaining natural stole tiles than there is in some alternatives such as wood flooring.