Natural Stone / August 26, 2018 / FifineAsselin
The absorption rate is how porous a material is. The more absorbent a material is the more likely it is to stain as well as how much cracking damage it suffers during freezing conditions. There are four different levels of absorption when it comes to natural tiles. Non-vitreous is the highest absorption and should not be used in any environment that can become damp. Semi-vitreous are less absorbent but will require more maintenance the more liquid is exposed to them. Vitreous is the standard level of absorption and is considered most appropriate to be placed in areas with low to mid indoor or outdoor traffic. Impervious is the most resistant when it comes to the absorptions of liquids and are the easiest to maintain and clean.
A simple brush and a wash using a special stone soap is all that it takes to keep your tiles looking great which wont take much effort at all. When it comes to putting in an attractive floor around a pool patio or even in the bathrooms of homes many people are choosing a natural stone look. The most popular choice as of late is to use Travertine floor tiles. There are many functional reasons to use these beautiful natural stone tiles however the aesthetic appearance of them is often enough of a reason. The stone tiles such as the Travertine Tiles many residents are using can be found in homes all around the world. The ultimate cool natural stone tile for around the pool The functional reasons people from large cities across the globe are using these attractive stone tiles are many in number and make the cost of the tiles seem unimportant.
First of all due to the high quality and fact that it is a natural material natural stone can be more expensive than other solutions. They also can be more difficult to fit and maintain which can also increase the cost. One factor with fitting natural stone tiles is that they can be more difficult to cut when tiling around fixtures and fittings. The best way to cut stone tiles is to use an electric wet tile cutter and preferably to do this outside or in a prepared environment due to the potential to get water and debris spray. When fitting natural stone tiles it is also important to seal the tiles after fitting as this may otherwise result in the stone becoming stained.