Natural Stone / August 30, 2018 / FifineAsselin
Maintenance time also depends on the traffic - for example in high traffic areas such as a food court in a big shopping center you will need more maintenance than a low traffic area such as a guest bathroom in your house. Natural stone tiles bring beauty and peace to your home so it is worth spending a little bit of extra money to maintain them. Natural stone tiles are flooring materials that are created from mountain born materials such as Slate Marble Limestone "Travertine" Granite and Sandstone. They each have different characteristics and styles that are used for different each individual projects. When shopping and choosing what natural stone tiles you wish to use it is important The first factor to consider is the absorption rate.
This should not be counted as a negative side to natural stone tiles as there are ways to maintain them and we must bear in mind that any natural products requires maintenance. Once natural stone tiles are laid there are three steps that must be done to maintain the tiles which includes filling washing and sealing. This process must be repeated every two to five years depending on the quality of natural stone. The first step after laying the tiles is to fill them. All the holes must be filled with filler of the same color. Any gap between the tiles must be grouted. You need to allow one to two days for the filler and grout to be dried.
They should then explain in detail what they are looking for when they do the remodel. It is best for the homeowner if they have specific ideas and plans laid out so that the contractor fully understands what they are getting themselves into. When telling the contractor of your plans be sure to tell them that you want to use natural stone tiles. This way if the contractor has some sort of hesitation about working with the material you can cross that contractor off your list for those that you are considering hiring for your remodel. Natural stone tiles usually do not make contractors want to run from a project however some contractors may just not like working with the material since it does require a few extra tools that they may or may not have on hand. Once you get all of the information from the contractors and have narrowed down the list of just who can work with the materials that you have specified.