Natural Stone / August 19, 2018 / FifineAsselin
You should do three sponging cycles in order to maintain the cleanliness and stunning of the tile. The purpose of the first sponging is to clean the excess grout over the tile second is to smoothed the joints and third is to clean any residue left on the tile. However you have to allow minutes of time between sponging cycles because this allow the grout to set properly. Also be reminded that use the clean side of the sponge when wiping and cleaning the tile after grouting. And lastly wipe down the tile the next day to help seal the grout and to clean the tile as well. Always make sure that you use the correct sealant labeled for natural stone tile in order to maintain the appearance of the natural stone tile. Many people complain about natural stone floor tiles absorbing dirt or start developing holes after few years.
It is time to get price quotes. These should be thoroughly researched and in written format so that you can compare more easily. Do not just take the word of the person since then you have no sort of contract with the person. Overall when finally deciding that it is time to remodel you need to make sure that you are completely comfortable with your decision of contractor and that they do know how to use natural stone tiles. There is nothing worse than realizing that you hired a dud since it means that the remodel of your dreams is not turning out as planned or it is taking longer than necessary. Natural stone tiles handle just like any other type of ceramic tile however have the look of stone.
Im using a few of my vacation days to make a final push in the kitchen before moving on to the master bath. From what Ive done so far I think the kitchen looks terrific! Sure its probably not as perfect (and certainly the work isnt getting done as fast) as it would be if I hired a professional crew but Im enjoying putting in the natural stone tiles on my own. I think Ill derive greater satisfaction out of the finished product knowing it came as a direct result of my own toil. Now lets just hope I actually get all of this work done in a reasonable amount of time! All natural stone tiles are subject to variations in colour grain structure tonality and veining. Expert sales staff can give guidance on the correct procedure for handling installing and preserving each type of tile in the ranges available but it is strongly recommend all natural stone is installed by a professional stone mason or tiler. One of the advantages of having natural stone is its long lasting beauty. Sand dirt or grit can do damage to any surface so it is highly recommended that interior floors are frequently swept and mopped with a dry dust mop. Placing mats or rugs at the entrance of a hallway or room will also help minimise the problem. Also avoid using cleaning utensils which could have sharp edges as it will scratch and make the surface lose its shine. When cleaning natural stone always use a mild non-abrasive cleaning detergent with warm water. A clean mop for floors and a soft cloth for other surface areas should be used. The cleaning product you use should not have vinegar lemon or acid in its contents as these will do harm to the surface of the natural stone. In wet areas e.g. showers soap scum can be reduced by applying a non-acidic soap scum remover and using a squeegee to rub it in and wipe down with clean water.