Natural Stone / August 19, 2018 / FifineAsselin
This seal needs to be applied after tiles have been laid and grouted and after any residual dust adhesive or grout need to be removed with a residual remover. After applying and removing the residual remover a seal can then be added to help prevent materials and liquids from entering the pores of the stone and leaving potential marks. This seal needs to be regularly maintained in order to keep the tiles in good condition and can even be added to through the use of enhancing products to bring out the natural grain and contrasts of the stone. Natural stone tiles are one of the best types of tile that you can lay in your home whether you use them in the kitchen bathroom or anywhere else.
One important consideration to take into account when choosing tiles is of course their suitability for the application you need them in. Some tiles will be better suited for indoor use and may not be suitable for use in a wetroom or swimming pool application for example. This does however highlight their extreme versatility and the wide range of applications natural stone tiles can be used for from bathrooms to living rooms conservatories swimming pools wetrooms and kitchens. Another very significant benefit of using natural stone tiles for your floor or wall is that they lend themselves by nature to providing more flexibility in terms of patterns and design.
The absorption rate is how porous a material is. The more absorbent a material is the more likely it is to stain as well as how much cracking damage it suffers during freezing conditions. There are four different levels of absorption when it comes to natural tiles. Non-vitreous is the highest absorption and should not be used in any environment that can become damp. Semi-vitreous are less absorbent but will require more maintenance the more liquid is exposed to them. Vitreous is the standard level of absorption and is considered most appropriate to be placed in areas with low to mid indoor or outdoor traffic. Impervious is the most resistant when it comes to the absorptions of liquids and are the easiest to maintain and clean.