Glass Tile / January 21, 2019 / Morgana Faubert
In this method colors are added to the top or bottom of the glass. Fused glass tiles are characterized with a translucent area and a layer of opaque color visible through the tile. These tiles are further treated with an etching or other coating for aesthetics or abrasion. Sintered tile is a variety made by pressing glass powder into dies and then heated until the particles fuse. The color is either added into the powder or added topically after cooling. Unlike smalti tiles sintered tiles tend to have a uniform look. This milky and scratch-resistant finish makes it versatile. Cast tile is made by inserting chunks of glass into a mold which gives it a layered look.
A tile backsplash is a technique in interior designing that could improve the décor of your home especially in the kitchen and bathroom area. It refers to the installation of tiles to protect your walls primarily from water splashes. However tile backsplashes are not limited to the kitchen or bathroom area. Although the main use of this technique is for protecting the walls of water splashes you can use it anywhere in your home. You may use it to refurbish your fireplace or give a new glimmering effect to your walls. There are different kinds of tile backsplashes and one of them is the glass tile backsplashes. How can this type of tile backsplash improve the décor of your home? With glass tiles you create an illusion of wider kitchen space or any space in your home. Glass tiles reflect light from the surrounding environment which make your space look brighter and wider.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.