Metal Tile / September 5, 2018 / FifineAsselin.
For copper you have a few choices unless you have sealed the surface. You may allow the metal tiles to age and simply clean them on a regular basis using water and soap. You may also use a copper cleaner if you want your metal accent tiles for backsplash to remain shiny. However patina copper tiles have a clear coat protection so it will not do any good if you use a copper cleaner on them. Instead just stick to water and soap to keep them clean. You have to apply special care on titanium tiles even if they are only titanium-colored. Never use water and soap on them. Instead prepare a solution with equal parts of water and vinegar and then apply it on the tiles using a clean dry cloth to keep them shiny and clean.
You can prevent this from happening by using a reliable solvent-based sealer. You can spray or brush it on the metal tiles and it will create a barrier to keep moisture from passing through the metal accent tiles for backsplash. However make sure that you cover the whole surface of the tile because even a small area that is left untreated will oxidize. Cleaning the Metal Tile You can clean most metal tiles using dishwashing detergent and warm water. Wash them down using micro fiber cloth making sure you rinse them thoroughly so there will be no smudges. Do not use water and soap on metal accent tiles for backsplash that are made from stainless steel. Instead use a proper cleaner for stainless steel. Apply it using a dry lint-free cloth and make sure that you do it carefully because stainless steel tiles scratch easily.
Accent tile is usually adorned with some kind of pattern and the type of metal should be carefully chosen so the color will work well with the color scheme of the room. There are many different types of metal to select from including bronze silver and copper. Pewter is a popular material for accent pieces. Using tile for accent can be more cost effective because you do not need to purchase as much of it. Just make sure to always purchase some extra tile just in case it is needed at the time of installation. Another use for tile made from metal is as a focal point or mural. This is especially popular in kitchens but can be done in any room of the home.
Although more costly than the traditional asphalt metal provides qualities not found in the less expensive alternatives. Metal tile roofing is mainly made of one of the following - aluminum steel or copper. Your prices are affected by which material you choose as well as by the intricacy of the design pattern. Looking at one individual tile will not allow you get the overall feel of the roof surface. You should be able to view pictures or samples containing a larger section. This will give you the "picture" created by the assembly of the individual tiles. It may be quite different than what you expect. It is better to see this now than later when a whole section of your roof has been completed! One of the best qualities of metal tile roofing is the durability.