Metal Tile / August 31, 2018 / FifineAsselin
For roofing it is entirely another story as you will need professionals who are specialized in this type of work. The instructions from the manufacturer have to be followed to the last detail if you want to reap the benefits of the warranty which is being offered. There will be special instructions for preparing the surface under-laying and so on. Metal roofing tiles offer an attractive solution to modern roof coverings. Pressed metal tiles come in a number of different styles mimicking more traditional clay or slate roofing. Metal roofing tiles have come a long way since their introduction 50 years ago. The first tiles introduced had a bitumen coating which tended to melt in hot climates.
The smaller rod is used to fix batons around hips and valleys and saves a lot of time messing around with a tape. Cutting and bending At roof terminations and intersections tiles are cut to fit allowing for a 50mm bend in the tile. It is this turn up/down that provides the waterproofing of the roof. It is important to bend a sufficient upturn or water may be blown under the ridge or hip. I have found by taping the jaws of the bender with several layers of duct tape it allows the tiles to be gripped firmer without damaging the paint of the tile. Aim to use half the tile per cut. This will leave you enough metal to get another cut for the opposing side. Valley cutting Marking and cutting the valley at ground level gives a much neater appearance. Instead of measuring each tile cut individually the tiles are laid along the ground as if they were on the roof.
Accent tile is usually adorned with some kind of pattern and the type of metal should be carefully chosen so the color will work well with the color scheme of the room. There are many different types of metal to select from including bronze silver and copper. Pewter is a popular material for accent pieces. Using tile for accent can be more cost effective because you do not need to purchase as much of it. Just make sure to always purchase some extra tile just in case it is needed at the time of installation. Another use for tile made from metal is as a focal point or mural. This is especially popular in kitchens but can be done in any room of the home.