Glass Tile / September 1, 2018 / FifineAsselin
Clean water is the key to finishing the job quickly and thoroughly. Once the tiles have been cleaned check for any voids or pits and fill them in as needed. Use the sponge and clean water to wipe away any remaining grout. Allow to dry for a few hours and then use a dry cheese cloth to clean the remaining grout residue. After the glass tile has dried for 48 hours its ready for use! Glass tile is not only beautiful to look at its also quite versatile. The Romans were known to use mosaic tiles all over their empire to create a feeling of home and to add religious pictorial and decorative significance to rooms of their homes. So if youd like to do as the Romans did get yourself some tiles.
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.
Glass tiles are essentially pieces of glass formed into consistent shapes. Glass mosaic tiles are suitable for both internal and external applications as they are impervious to frost sunlight and water. This quality makes it best suited for wet or constantly submerged areas. They are easy to clean maintain and they never discolor. Glass tiles have a varied application in black slashes of drawing-room dining kitchen bath-room etc... They are also used to highlight certain features. The spot lighting has further increased their use. Although glass tiles are complex to install the benefits and beauty makes us over see. Production methods determine look and feel of a glass tile. There are four major types of glass tile based on their manufacturing method. They are smalti fused sintered and cast.