Glass Tile / January 9, 2019 / Fleurette Theriault
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.
The elasticity of the Adesilex P10/Keraply combination allows the glass tiles to stretch without breaking and MAPEI is so confident in this installation solutions ability to provide lasting results that they offer a 5-year warranty on materials and labor. With a guarantee like that its no wonder that so many tile contractors and retailers stand behind MAPEIs products as the best in the industry. Whether you are installing glass tile on the exterior of your home as an accent in the garden or on the bottom of your swimming pool you need to take into account the unique challenges that comes with using glass tile outdoors. These challenges are not insurmountable as long as you take care to use the proper installation materials.