Glass Tile / January 9, 2019 / Fleurette Theriault
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.
The most important step in putting glass tile in a swimming pool is choosing the right installation materials. To reiterate the high rate of expansion and contraction of glass caused by temperature changes is the leading cause of cracks and damage to installed tiles. In order to compensate for this special thin-set adhesives and additives have been developed that expand and contract with the glass. The leading manufacturer of glass-specific tile adhesive systems is MAPEI and their Adesilex P10 thin-set and Keraply additive can be combined into an installation system that is specifically designed for applications where the glass tiles are completely submerged.
Glass tiles are essentially pieces of glass formed into consistent shapes. Glass mosaic tiles are suitable for both internal and external applications as they are impervious to frost sunlight and water. This quality makes it best suited for wet or constantly submerged areas. They are easy to clean maintain and they never discolor. Glass tiles have a varied application in black slashes of drawing-room dining kitchen bath-room etc... They are also used to highlight certain features. The spot lighting has further increased their use. Although glass tiles are complex to install the benefits and beauty makes us over see. Production methods determine look and feel of a glass tile. There are four major types of glass tile based on their manufacturing method. They are smalti fused sintered and cast.