Glass Tile / January 5, 2019 / Astrid Hachee
In situations where glass tile is exposed to extreme temperature differences an elasticizing polymer is added to the mix allowing the grout to stretch and flex preventing breaks from occurring in the delicate glass tiles. Using a grout float scoop a manageable amount of grout onto the float. Start at the farthest or highest spot away from you and spread the grout in between the tiles diagonally across the pattern. Dont worry about getting grout all over the tiles. The grout must be firmly pressed into the grout lines with the grout float covering all spaces and voids. Once a 3x3 section of grout has been applied to the tile use the small rubber edge of the grout float to remove about a third of the grout from between the tiles.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.
You may be wondering what is a fused glass tile blocks where can it be used and what designs are available. Read on to learn more. What are fused glass tile blocks? How are they made? This product combines the beauty of decorative glass art with the strength structure and security of blocks. These tiles are individually hand crafted by glass artisans. The tiles are made by fusing layers of colored and clear glass in a kiln at a temperature greater than 1400 degrees. Since the tiles use real colored glass they wont fade or delaminate like inexpensive units. The tiles are available in 73 transparent 46 opaque and custom dichroic and iridescent colors. Once the tiles are made they are fused to the glass blocks in any type of custom design. For centuries glass has been a featured material in mosaic media to decorate and articulate a building.