Glass Tile / January 13, 2019 / Odette Pinneau
Their craftsmen work the glass by hand to transform each tile into a piece as unique as a snowflake. Bisazza glass tile uses the highest quality ingredients and constantly works to improve the production process to result in stronger materials with more vibrant colors. Shortcuts in production and compromises with materials result in a finished product lacking perfectly squared edges color quality and strength. To the untrained eye the product may look similar in display but it is in fact extremely inferior. Quality producers of glass tile may also apply a bevel to each of their tiles to allow for more level and consistent surfaces during installation.
There normally is not a concern with seeing the mesh backing through this tile. The same precautions still need to be taken into consideration for installation as well. The last thing to take into consideration is the grout. To play it safe the best grout to use is either an un sanded grout or specialty grout. The reason you will wand an un sanded grout is there is no sand particles in the unsanded grout. Sand particles found in sanded grout can possibly scratch the surface of the glass. The specialty grouts do not have any sand particles in them including the epoxy grout and urethane grouts. Home owners who want to make their kitchen pools or bathrooms look good often consider using glass tile. However these tiles can be quite pricey and can end up costing a person more when it comes to construction and renovation projects.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.