Glass Tile / January 5, 2019 / Astrid Hachee.
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.
They opt for glass tile because of its shimmering beauty - especially when submerged. The vibrant colors that glisten from beneath the crystal clear water never fails to captivate homeowners or their guests. It is this superior appearance of glass tile that entices people to undertake these large projects. As you can probably tell these customers are making a huge investment in their properties; they expect their tile installation to be flawless and long lasting. In order to satisfy these demanding clients sales staffs have had to become well versed in the intricacies of glass tile installation. While glass tile has its own inherent quirks when it comes to installation an exterior application such as a swimming pool requires even more specialized attention and materials. The main challenge for installing glass tile outdoors is glass relatively high expansion coefficient.