Glass Tile / January 11, 2019 / Morgana Faubert
Most quality manufacturers sponsor minimum of two-day seminars to ensure a finished look that will last decades rather than months. A Phoenix Arizona based company recently conducted two-day seminars bringing Alex Arcaro of Bisazza to their Scottsdale showroom to teach contractors the fine art of glass tile installation. The benefit of a "paper faced glass tile" is that it allows for an efficient method of installation and is used by quality glass tile manufacturers. When installing a paper faced material 100% of the glass tile is bonded to the substrate which has tremendous benefits especially if it is being used in wet area applications.
The reason so much more grout is removed than when grouting conventional tile is because light refracts better through the glass tile when the sides of the tiles are exposed to the light. Work 3x3 spaces for about ½ hour or until the grout begins to dry then sponge off the grout. Bring several buckets of clean water and a sponge to the work area before you begin. Soak up some water into the sponge and gently wipe away the excess grout that is adhered to the tile. Smooth the grout lines with the sponge using one continuous swipe. Flip the sponge over and swipe more grout from the tiles until it becomes full of grout. Rinse the sponge in a clean bucket of water and repeat.
The reason for doing this is when installing the glass tiles you do not want to see the trowel marks through the glass tiles. Another key to think about when installing the translucent tile is to make sure the surface behind the tile is white. If you have a painted kitchen and the walls are currently a dark or strong color that color could appear through the glass tile. If installing the translucent tile make sure the surface is painted white first and make sure the use of white thin set as well. The second type of glass is where the glass itself is a crystal type glass with the color backed on the back. Most 4mm or 8mm crystal type glass is clear and then the color of the tile is applied on the back of the tile giving it the color.