Glass Tile / January 10, 2019 / Genevieve Brunelle
If you are really set on using glass on your renovation and construction projects there is a way to cut down on costs and that is through the use of discount glass tile. There are a number of places where you can look for them that come with huge discounts on them and these are often due to a number of reasons. One reason for the huge discounts you can get on stock is because these tiles that you get from certain dealers have been discontinued. This does not mean however that they are of lower value or quality than other tiles that you can find at higher prices. This just means that these tiles will no longer be available to you or anybody else once the present stock is sold out.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.