Glass Tile / January 18, 2019 / Fealty Allaire
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.
Using colorful glass tiles as a backsplash can really accentuate your cabinets and provide and easy to clean surface for the walls of your kitchen--a place that is notorious for getting splashed and stained. Bathrooms: Glass tile is gorgeous in bathrooms. Using cool blue/green colors against white fixtures can have an incredibly pleasing effect on the eye. You can opt to tile the entire wall space or just the areas around the tub and sink. Whatever you decide its guaranteed to look phenomenal. Living Rooms: Using tile on the walls in places besides the bathroom and kitchen has really started to take off over the last few years. Glass tiling as a wall covering looks ultra modern and hip. Generally people have just tried it on accent walls and then chose a coordinating paint color to go with it but if youre feeling ambitious (and the rooms size warrants it) just go ahead and add glass tiles to the whole room.
In situations where glass tile is exposed to extreme temperature differences an elasticizing polymer is added to the mix allowing the grout to stretch and flex preventing breaks from occurring in the delicate glass tiles. Using a grout float scoop a manageable amount of grout onto the float. Start at the farthest or highest spot away from you and spread the grout in between the tiles diagonally across the pattern. Dont worry about getting grout all over the tiles. The grout must be firmly pressed into the grout lines with the grout float covering all spaces and voids. Once a 3x3 section of grout has been applied to the tile use the small rubber edge of the grout float to remove about a third of the grout from between the tiles.