Glass Tile / September 12, 2018 / FifineAsselin.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.
You may be wondering what is a fused glass tile blocks where can it be used and what designs are available. Read on to learn more. What are fused glass tile blocks? How are they made? This product combines the beauty of decorative glass art with the strength structure and security of blocks. These tiles are individually hand crafted by glass artisans. The tiles are made by fusing layers of colored and clear glass in a kiln at a temperature greater than 1400 degrees. Since the tiles use real colored glass they wont fade or delaminate like inexpensive units. The tiles are available in 73 transparent 46 opaque and custom dichroic and iridescent colors. Once the tiles are made they are fused to the glass blocks in any type of custom design. For centuries glass has been a featured material in mosaic media to decorate and articulate a building.
Choosing the right grout color to match your glass tile is essential to preventing blemishes and imperfections from being easily spotted. Because of the reflective surfaces on these tiles grout can disrupt the refraction of light easily catching the eye and revealing blemishes in the tiles. A suitable match is one that is similar in color to the tiles color. Mixing grout is as simple as making pancake batter. Use a paddle bit and a ½" drill to mix non-sanded grout into a five gallon bucket stirring in water slowly. Once the mix has achieved the consistency of pancake batter the grout will be mixed to perfection. Add more water or more grout as needed to thin or thicken the grout mix.
Clean water is the key to finishing the job quickly and thoroughly. Once the tiles have been cleaned check for any voids or pits and fill them in as needed. Use the sponge and clean water to wipe away any remaining grout. Allow to dry for a few hours and then use a dry cheese cloth to clean the remaining grout residue. After the glass tile has dried for 48 hours its ready for use! Glass tile is not only beautiful to look at its also quite versatile. The Romans were known to use mosaic tiles all over their empire to create a feeling of home and to add religious pictorial and decorative significance to rooms of their homes. So if youd like to do as the Romans did get yourself some tiles.