Glass Tile / September 3, 2018 / FifineAsselin
They opt for glass tile because of its shimmering beauty - especially when submerged. The vibrant colors that glisten from beneath the crystal clear water never fails to captivate homeowners or their guests. It is this superior appearance of glass tile that entices people to undertake these large projects. As you can probably tell these customers are making a huge investment in their properties; they expect their tile installation to be flawless and long lasting. In order to satisfy these demanding clients sales staffs have had to become well versed in the intricacies of glass tile installation. While glass tile has its own inherent quirks when it comes to installation an exterior application such as a swimming pool requires even more specialized attention and materials. The main challenge for installing glass tile outdoors is glass relatively high expansion coefficient.
In this method colors are added to the top or bottom of the glass. Fused glass tiles are characterized with a translucent area and a layer of opaque color visible through the tile. These tiles are further treated with an etching or other coating for aesthetics or abrasion. Sintered tile is a variety made by pressing glass powder into dies and then heated until the particles fuse. The color is either added into the powder or added topically after cooling. Unlike smalti tiles sintered tiles tend to have a uniform look. This milky and scratch-resistant finish makes it versatile. Cast tile is made by inserting chunks of glass into a mold which gives it a layered look.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.