Glass Tile / January 21, 2019 / Belda Jodion
Glass tiles are essentially pieces of glass formed into consistent shapes. Glass mosaic tiles are suitable for both internal and external applications as they are impervious to frost sunlight and water. This quality makes it best suited for wet or constantly submerged areas. They are easy to clean maintain and they never discolor. Glass tiles have a varied application in black slashes of drawing-room dining kitchen bath-room etc... They are also used to highlight certain features. The spot lighting has further increased their use. Although glass tiles are complex to install the benefits and beauty makes us over see. Production methods determine look and feel of a glass tile. There are four major types of glass tile based on their manufacturing method. They are smalti fused sintered and cast.
Both trendy and good for the earth read on to learn why your next decorating project should involve recycled glass tiles. One of the benefits of recycled tile is that the abundance of wasted glass in landfills is put to good use leaving the land free to be utilized for more biodegradable material. (This also means that landfills dont need to be expanded to accommodate the rising amount of glass waste.) Recycled glass tile is also better for the environment because it takes take less than half the energy required to produce other forms of tile. Additionally when you move on to other decorating themes you can re-recycle your recycled tiles too! Recycled glass tile is easy to install easy to clean and looks great in any room including shower stalls bathroom and kitchen floors as well as backsplash areas.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.