Natural Stone / September 3, 2018 / FifineAsselin.
One reason for this is because stone is a very strong material that is more difficult to cut than a wood board or even a ceramic tile which would be scored and snapped. In addition to this you may need to prepare the surface of the sub-floor upon which your tiles will be laid if it is uneven or cracked. This can be done in most cases with a good quality self-leveling compound available from all respectable tile and flooring specialists. When preparing natural stone tiles for laying be sure to spend time inspecting them both for chips and surface scratches. Typically natural stone tiles will arrive with a light wax coating to protect them from potential damage in transit.
This seal needs to be applied after tiles have been laid and grouted and after any residual dust adhesive or grout need to be removed with a residual remover. After applying and removing the residual remover a seal can then be added to help prevent materials and liquids from entering the pores of the stone and leaving potential marks. This seal needs to be regularly maintained in order to keep the tiles in good condition and can even be added to through the use of enhancing products to bring out the natural grain and contrasts of the stone. Natural stone tiles are one of the best types of tile that you can lay in your home whether you use them in the kitchen bathroom or anywhere else.
This is because they are very easy to clean as all you really need is a mop and water to give them a quick wipe on a regular basis. As well as being more convenient this also means that they are a very hygienic option for your floor. If the tiles are sealed they will be non-porous helping to keep out bacteria. If you are seeking an alternative tile for your floor and want to achieve a high quality and sophisticated finish natural stone tiles are perfect. When you choose natural floor tiles you will find that you still have plenty of options in terms of materials including sandstone marble granite flagstone and so much more.
Always take care to wear hand and eye protection as well as suitable clothing and remove and power sockets or electrical equipment that is likely to get wet in the process. When marking a cut line on a natural stone tile you may prefer to use a crayon as opposed to a pencil which is likely to not make a significant mark on the tile. Take care to go extra slow when reaching the end of your cut as if you go too fast and force the tile through it is likely to break rendering it difficult to use. If you are cutting a particularly large tile try to get someone to help you steady the tile as you cut since the weight of either piece of tile can start to pull the whole piece apart - encouraging a snap - as you advance through the tile.