Glass Tile / January 16, 2019 / Astrid Hachee
In situations where glass tile is exposed to extreme temperature differences an elasticizing polymer is added to the mix allowing the grout to stretch and flex preventing breaks from occurring in the delicate glass tiles. Using a grout float scoop a manageable amount of grout onto the float. Start at the farthest or highest spot away from you and spread the grout in between the tiles diagonally across the pattern. Dont worry about getting grout all over the tiles. The grout must be firmly pressed into the grout lines with the grout float covering all spaces and voids. Once a 3x3 section of grout has been applied to the tile use the small rubber edge of the grout float to remove about a third of the grout from between the tiles.
Both trendy and good for the earth read on to learn why your next decorating project should involve recycled glass tiles. One of the benefits of recycled tile is that the abundance of wasted glass in landfills is put to good use leaving the land free to be utilized for more biodegradable material. (This also means that landfills dont need to be expanded to accommodate the rising amount of glass waste.) Recycled glass tile is also better for the environment because it takes take less than half the energy required to produce other forms of tile. Additionally when you move on to other decorating themes you can re-recycle your recycled tiles too! Recycled glass tile is easy to install easy to clean and looks great in any room including shower stalls bathroom and kitchen floors as well as backsplash areas.
The reason so much more grout is removed than when grouting conventional tile is because light refracts better through the glass tile when the sides of the tiles are exposed to the light. Work 3x3 spaces for about ½ hour or until the grout begins to dry then sponge off the grout. Bring several buckets of clean water and a sponge to the work area before you begin. Soak up some water into the sponge and gently wipe away the excess grout that is adhered to the tile. Smooth the grout lines with the sponge using one continuous swipe. Flip the sponge over and swipe more grout from the tiles until it becomes full of grout. Rinse the sponge in a clean bucket of water and repeat.