Glass Tile / January 18, 2019 / Morgana Faubert
These are tiles that are made with the use of recycled glass taken from old bottles old windows and other glass items that no longer have any real use. These recycled tiles are made by grinding the old glass into a fine powder color is then added to this powder and the resulting mixture is then pressed into tile molds. These are then baked and cooled. Getting inexpensive tile is easy if you know where to look. Some of the best places for you to find these tiles are online or in home improvement stores near you. Just look for glass tiles in the sale area of these stores or in the discontinued section of these sites that sell them for cheap. To most tile retailers the largest customers are always the people tiling their pools.
Although the definition of clear/translucent glass is "allowing light to pass through partially or diffusely" it doesnt mean that all clear glass tiles are transparent in a way that you can see for example an object or your hand behind it. Clear glass is the material used to make these tiles but they can have color or not. There are basically three types of clear glass tiles: back colored stained and plain or non-colored. Back colored clear glass mosaic tiles are by far the most popular in the market. The tiles are made of clear/translucent glass usually from 4mm to 8mm thick and they receive a coating/painting on the back during manufacturing which is what gives the color to the tile.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.