Glass Tile / August 29, 2018 / FifineAsselin
Refurbishing your pool is affordable now. You can choose an exotic design or a classic look that makes your pool stand out and invites your visitors to dip into the cool waters. Backsplashes are refreshing and can improve the interior décor of your home without spending a fortune. The advantages of using backsplash include a wide array of designs and color options and protection for your walls against water stains and other nasty things. Thus a backsplash is an excellent way to redecorate your kitchen bathroom and pool area. Moreover glass tiles are resistant to stains so cleaning them is easier. You do not have to use so many cleaning agents to keep these tiles pristine.
In this method colors are added to the top or bottom of the glass. Fused glass tiles are characterized with a translucent area and a layer of opaque color visible through the tile. These tiles are further treated with an etching or other coating for aesthetics or abrasion. Sintered tile is a variety made by pressing glass powder into dies and then heated until the particles fuse. The color is either added into the powder or added topically after cooling. Unlike smalti tiles sintered tiles tend to have a uniform look. This milky and scratch-resistant finish makes it versatile. Cast tile is made by inserting chunks of glass into a mold which gives it a layered look.
Consumers need to consider that many mesh backed material use poor quality glue to bond the tile to the mesh. When the mesh side is installed to the surface the mesh acts as a barrier between the tile and substrate. If the glue subsequently breaks down or the bond fails the tile can then easily loosen and fall out because little of the tile surface is actually bonded to the substrate. This failure can begin almost immediately or can take up to a few years after all installation warranties have expired. With Chinese produced glass tile my experience has shown the glue used to bond the tile to the mesh is lower in quality than the glue used in higher quality products produced in Europe or quality US manufacturers.