Glass Tile / August 21, 2018 / FifineAsselin
Clean water is the key to finishing the job quickly and thoroughly. Once the tiles have been cleaned check for any voids or pits and fill them in as needed. Use the sponge and clean water to wipe away any remaining grout. Allow to dry for a few hours and then use a dry cheese cloth to clean the remaining grout residue. After the glass tile has dried for 48 hours its ready for use! Glass tile is not only beautiful to look at its also quite versatile. The Romans were known to use mosaic tiles all over their empire to create a feeling of home and to add religious pictorial and decorative significance to rooms of their homes. So if youd like to do as the Romans did get yourself some tiles.
What that means is glass expands and contracts at a greater rate than other materials someone might use in their pool e.g. ceramic or stone. Since the tile is adhered to the bottom of the pool while its expanding and contracting it can easily crack and break if the cement its laid into doesnt stretch with it. Therefore the question often heard from customers is "How do I install glass tile in my pool without having to repair the broken tiles year after year?" The answer has not always been an easy one. However with advances in technology and contractors growing experience installing glass tile we are now able to provide customers with the right recommendations so that their pool installation experiences minimal problems.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.