Glass Tile / September 12, 2018 / FifineAsselin
What that means is glass expands and contracts at a greater rate than other materials someone might use in their pool e.g. ceramic or stone. Since the tile is adhered to the bottom of the pool while its expanding and contracting it can easily crack and break if the cement its laid into doesnt stretch with it. Therefore the question often heard from customers is "How do I install glass tile in my pool without having to repair the broken tiles year after year?" The answer has not always been an easy one. However with advances in technology and contractors growing experience installing glass tile we are now able to provide customers with the right recommendations so that their pool installation experiences minimal problems.
The first type of tile is a translucent glass. A translucent glass is a type of tile that you could actually hold up and see right through it. The most common types of glass that is translucent is a recycled glass or an oval penny round or brick type of tile. Majority of translucent glass tiles are paper faced. The reason that most of these are paper faced is because the mesh backing can be seen through the glass tile. When installing this type of glass tile you want to use a small notch trowel when spreading your mastic on the installation surface. After spreading the mastic you will want to flatten down or knock down the trowel marks.
In this method colors are added to the top or bottom of the glass. Fused glass tiles are characterized with a translucent area and a layer of opaque color visible through the tile. These tiles are further treated with an etching or other coating for aesthetics or abrasion. Sintered tile is a variety made by pressing glass powder into dies and then heated until the particles fuse. The color is either added into the powder or added topically after cooling. Unlike smalti tiles sintered tiles tend to have a uniform look. This milky and scratch-resistant finish makes it versatile. Cast tile is made by inserting chunks of glass into a mold which gives it a layered look.